LAZER company never ceases to amaze us, once again proved how much they are involved in technology and product development by launching their latest and most advanced Triple-R LAZER 1250 SmartView lamp, which crush the competition in terms of technology and quality.
Especially for our customers, we have to offer the full LAZER Triple-R 1250 Smartview lamp set, to make the best use of this wonderful LAZER lamp.
The kit together with the lamp itself includes:
Dashboard Controller, in which we will be able to set up 5 different lamp functions, can be easily installed on the dashboard or windshield - according to your own convenience. Each of the functions described below will find its application for even the most demanding driver.
- E-Mark Mode: in this mode the lamp works in accordance with the requirements of EU road law (position lights).
- E-Boost Mode: uses the maximum light intensity of the lamp for best visibility (for off-road use only).
- Speed Adapt Mode: adjusts beam pattern depending on the speed of the vehicle within 50 km/h - 80 km/h.
- Near-View Mode: provides the highest level of short-range lighting, ideal for more demanding weather conditions such as fog or snow.
- Dynamic Dip: provides a smoother transition between high beam and low beam, it is a very pleasant and good for our eyesight solution, gives our eyes time to adapt when changing the intensity of lighting.
CanM8 Duo interface: it is a system adjusting the beam pattern to the vehicle speed, required for the "Speed Adapt Mode" to work, almost compatible with any car model (but in the case of the Volvo brand please contact our office for a replacement).
Anti-Theft Unit: this is an innovative solution that uses a system that has been specially programmed only for the lamp with which it is included in the set. The function of such a system is to block the operation of the lamp if it is disconnected / removed from the interface / vehicle, preventing the use of this lamp without this connection, where the interface is safely installed inside the vehicle.
Central mounts (2x) and side mounts (1x): quick and easy to install, stabilize the lamp and reduce vibration, all thanks to high quality and precision of workmanship.
Quick-Start Guide: this simple and easy to understand instruction has made the lives a lot of easier for many of our customers :)
Voltage Range | 9-32V |
LED Life | 50 000 hours |
Weight | 1940 g |
Total Luminous Flux | 12170 Lm |
Number of High Output LEDs | 12 |
Power Consumption | 105 W |
Current Draw (at 14.4V) | 7.3 A |
Certification | ECE R112 |
Width | 590 mm |
Depth | 103 mm |
Height | 73 mm |
PHOTOMETRIC DATA | |
0.25 lx | 1463 m |
0.5 lx | 1035 m |
1 lx | 732 m |
3 lx | 422 m |
What's included:
- x1 LAZER Triple-R 1250 Smartview
- x1 Anti-Theft Unit
- x1 Dashboard Controller
- x1 CanM8 Duo Interface (Speed Adapt)
- x2 Centre Mounts (1114K)
- x1 Side Mount Kit (1118K)
- x1 Quick-Start Guide
Call us! +48 85 711 95 58 |
LAZER company never ceases to amaze us, once again proved how much they are involved in technology and product development by launching their latest and most advanced Triple-R LAZER 1250 SmartView lamp, which crush the competition in terms of technology and quality.
Especially for our customers, we have to offer the full LAZER Triple-R 1250 Smartview lamp set, to make the best use of this wonderful LAZER lamp.
The kit together with the lamp itself includes:
Dashboard Controller, in which we will be able to set up 5 different lamp functions, can be easily installed on the dashboard or windshield - according to your own convenience. Each of the functions described below will find its application for even the most demanding driver.
- E-Mark Mode: in this mode the lamp works in accordance with the requirements of EU road law (position lights).
- E-Boost Mode: uses the maximum light intensity of the lamp for best visibility (for off-road use only).
- Speed Adapt Mode: adjusts beam pattern depending on the speed of the vehicle within 50 km/h - 80 km/h.
- Near-View Mode: provides the highest level of short-range lighting, ideal for more demanding weather conditions such as fog or snow.
- Dynamic Dip: provides a smoother transition between high beam and low beam, it is a very pleasant and good for our eyesight solution, gives our eyes time to adapt when changing the intensity of lighting.
CanM8 Duo interface: it is a system adjusting the beam pattern to the vehicle speed, required for the "Speed Adapt Mode" to work, almost compatible with any car model (but in the case of the Volvo brand please contact our office for a replacement).
Anti-Theft Unit: this is an innovative solution that uses a system that has been specially programmed only for the lamp with which it is included in the set. The function of such a system is to block the operation of the lamp if it is disconnected / removed from the interface / vehicle, preventing the use of this lamp without this connection, where the interface is safely installed inside the vehicle.
Central mounts (2x) and side mounts (1x): quick and easy to install, stabilize the lamp and reduce vibration, all thanks to high quality and precision of workmanship.
Quick-Start Guide: this simple and easy to understand instruction has made the lives a lot of easier for many of our customers :)
Voltage Range | 9-32V |
LED Life | 50 000 hours |
Weight | 1940 g |
Total Luminous Flux | 12170 Lm |
Number of High Output LEDs | 12 |
Power Consumption | 105 W |
Current Draw (at 14.4V) | 7.3 A |
Certification | ECE R112 |
Width | 590 mm |
Depth | 103 mm |
Height | 73 mm |
PHOTOMETRIC DATA | |
0.25 lx | 1463 m |
0.5 lx | 1035 m |
1 lx | 732 m |
3 lx | 422 m |
What's included:
- x1 LAZER Triple-R 1250 Smartview
- x1 Anti-Theft Unit
- x1 Dashboard Controller
- x1 CanM8 Duo Interface (Speed Adapt)
- x2 Centre Mounts (1114K)
- x1 Side Mount Kit (1118K)
- x1 Quick-Start Guide